SkyRC S65 AC Charger/Discharger

AGM & Cold Charge Modes for PB Battery

SkyRC S65 can charge AGM battery and also can be used for charging PB battery at very low temperatures.

Embedded XT60 Battery Connector

By embedding the XT60 battery connector in the charger, it gets more convenient & safe for charging the most popular battery with XT60 connector and avoid the possibilities of reverse polarity for it.

Smart & Efficient Cooling System

Temperature controlled 7000rpm high speed sleeve bearing cooling fan effectively blows the air through the extruded aluminum heat sink, effectively cooling the device.

Higher Accuracy with Three Decimals for Battery Voltage

The charger firmware is highly optimized by displaying the battery voltage with three decimals during the process of charging & battery voltage measuring.

This product is suitable for charging and discharging LiFe/ Lilon/ LiPo/ LiHV/ NiMH/ NiCd/ PB batteries. For Pb battery, AGM Charge and Cold Charge mode are available.

Size and Weight:

• Case Material: Plastic
• Case Size: 118 x 115 x 45mm
• Weight: 315g

Power:

• Input Voltage: AC 100-240V
• Charge Wattage: 65W
• Discharge Wattage: 10W

Battery Types/Cells:

• LiPo/LiFe/LiIon/LiHV: 2-4 cells
• NiMH/NiCd: 6-8 cells
• Pb: 3-6 cells

Battery Capacity Range:

• NiMH/NiCd: 100-50000mAh
• LiPo/LiIon/LiFe/LiHV: 100-50000mAh
• Pb: 100-50000mAh

Charge and Discharge:

• NiMH/NiCd: Delta peak detection
• LiPo: 4.18-4.25V/cell
• LiFe: 3.58-3.7V/cell
• LiIon: 4.08-4.2V/cell
• LiHV: 4.25-4.35V/cell
• Charge Current: 0.1A-6.0A
• Discharge Current: 0.1A-2.0A
• Balance Cells: 2-4 cells
• Balance Current: 1000mA/cell Max
• Safety Timer: 1-720minutes / off
• Charge Method: CC/CV for lithium types and lead (Pb) batteries Delta-peak Sensitivity for NiMH/NiCd

Discharge Cut-off Voltage:

• NiMH/NiCd:0.1-1.1V/cell
• LiPo:3.0-3.3V/cell
• LiFe:2.6-2.9V/cell
• LiIon: 2.9-3.2V/cell
• LiHV: 3.1-3.4V/cell